Introduction And Application Of Blind Rivets

Introduction to Hollow Rivet

Hollow rivets are usually used in clothing, footwear and other industries. Solid rivets need to be riveted again and used for the connection of heavy parts. They are often non detachable structures. Semi-hollow rivets are most widely used. The binding mouth (small wire diameter tail) nails are made of hard wire, which can penetrate the steel plate within 0.5mm thickness without pre drilling. Rivets can not be bent and deformed. They are widely used in password boxes, suitcases and military bags, Hollow nails (semi hollow rivets) are made of flexible wire. Generally, they are required not to crack after riveting. There are many types. Now, semi hollow nails or child and mother nails have been used in a large area to replace the shafts on some toys, which can greatly reduce the production cost. Core pulling and core striking rivets are mostly used for riveting of thin soft materials, and the general requirements are not strict. The manufacturing materials are usually produced with materials with good plasticity.

Application of blind rivets

Hollow rivets are usually used in clothing, footwear, and other industries. Solid rivets need to be riveted again and used for the connection of heavy parts. They are often nondetachable structures. Semi-hollow rivets are most widely used. The binding mouth (small wire diameter tail) nails are made of hard wire, which can penetrate the steel plate within 0.5mm thickness without pre-drilling. Rivets can not be bent and deformed. They are widely used in password boxes, suitcases, and military bags, Hollow nails (semi-hollow rivets) are made of flexible wire. Generally, they are required not to crack after riveting. There are many types. Now, semi-hollow nails or child and mother nails have been used in a large area to replace the shafts on some toys, which can greatly reduce the production cost. Core pulling rivets and core striking rivets are mostly used for riveting thin soft materials, and the general requirements are not strict. The manufacturing materials are usually made of materials with good plasticity