Classification And Use Of Double-Ended Studs

Among the fastener products, it can be said that Double End Stud is a very important product. It is not only used to connect the fixed link function of the machine but also has a very stable function. The double end wire has threads at both ends, and the screw in the middle. There are thick and thin, so we call it double end stud in our lives. Of course, everyone’s habits are different, and the name is also different. Obviously, the application range of this kind of stud is very wide. Mainly used in mining machinery, bridges, automobiles, crane towers, large-span steel structures, and large buildings, etc.

Classification and use of double end stud:

First, according to the bolt connection, we can carry out the corresponding force method, then it can be divided into ordinary and reamed holes. The ordinary main load-bearing axial force can also bear less demanding lateral force. The bolts used for reaming holes should be matched with the size of the holes and used when subjected to lateral force;

Second, there are some special uses, such as T-slot Bolts. It is mainly used in machine tool fixtures. Its shape is special and both sides of the head must be cut off.

Third, the double-end stud also has special studs for welding. One end has a thread and the other does not. It can be welded to the part, and the nut is screwed on the other side.