Hexagon bolt: a type of fastener composed of two parts, a head and a screw, which need to be matched with a nut to fasten and connect two parts through holes.
Classification1. According to the force mode of the connection, there are ordinary and reamed holes. The bolts used for reaming holes should be matched with the size of the hole and used when subjected to lateral force.
2. According to the shape of the head, there are hexagonal heads, round heads, square heads, countersunk heads, and so on. Generally, countersunk heads are used where the surface after the connection is required to be smooth without protrusions because the countersunk head can be screwed into the part. The head can also be screwed into the part. The tightening force of the square head can be larger, but the size is large. Hexagon head is the most commonly used.
In addition, in order to meet the need for locking after installation, there are holes on the head and holes on the rod. These holes can prevent the bolt from loosening when it is vibrated. Some bolts without threaded polished rods should be made thinner, called thin waist bolts. This kind of bolt is conducive to the connection of variable forces. There are special high-strength bolts on the steel structure, the head will be larger and the size will also change.
In addition, there are special uses: T-slot bolts, the most used on machine tool fixtures, special shapes, and both sides of the head should be cut off. Anchor bolts are used to connect and fix the machine and the ground. There are many shapes, U-shaped bolts Wait. There are also special studs for welding. One end has a thread and the other is not. It can be welded to the part, and the nut is directly screwed on the other side.
For details, please click: Taizhou First Rivet Co., Ltd Bolts Manufacturers
Taizhou First Rivet Co.,Ltd.
English
Español
عربى
简体中文
